Glass Whiteboard Installation Coral Gables, FL

This project involved the precision mounting of a modern glass whiteboard, requiring specialized hardware and careful alignment within a professional office environment.

The board was precisely measured and centered above the existing office credenza to maintain a balanced, symmetrical look within the workspace.  Professional leveling tools were used to ensure the board is perfectly horizontal, which is critical for both aesthetic appeal and writing comfort.

The board was secured using a six-point standoff mounting system. These stainless steel mounts create a “floating” effect, keeping the glass panel slightly off the wall.  Given the weight of tempered glass, high-capacity wall anchors were used at all six points (three at the top and three at the bottom) to ensure long-term stability and safety.

The glass panel was carefully lifted and aligned with the pre-installed standoffs to prevent any scratching of the wall or damage to the glass edges.Stainless steel decorative caps were hand-tightened to lock the board into place, providing a clean, industrial finish. Finally, pressure test was performed to ensure all six mounting points are rigid and the board does not shift when in use.